Cropping The Image Boundary [Autocrop Boundary] - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 9 Operational Settings
Cropping the Image Boundary
[AutoCrop Boundary]
Some fractional data may be generated in scanned images in
the process of scanning when Automatic Page Size Detection
is on. You can specify whether to include or exclude such
fractional data by using the AutoCrop Boundary function.
1
Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page
2
From the listing on the left, select [Device Setting 2]
[AutoCrop Boundary].
3
Select whether to include or exclude the fractional data.
Select [Optimize] to prevent any exclusion of fractional data from
scanned images, and select [Normal] to delete unnecessary data.
When you scan a document with text near the right
edge while [Normal] is selected, some pixel data there
may be lost.
While selecting [Optimize] can prevent data loss, it
may also generate black lines near the right edge.
For information on how to specify Automatic Page
Size Detection, refer to
170).
Skewed Document Images" (page
This setting does NOT appear when Kofax VRS is
used.
This setting is only applied in black & white mode.
"Automatically Correcting
97).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
197