Konica Minolta Fujitsu fi-6800 Operating Manual page 70

Chapter 4 How to Use the Operator Panel
■Checking the number of sheets scanned
Menu Function
/Enter
Send to Clear
Check
/Pause /Back
[ ] / [ ] Button
Stop
[Function/Enter] Button
Scan
Counter
iMFF Reset Eject
Power Button
See Step
[Menu] Button
[Scan] Button
[Function/Enter] Button
Scan
6
1
Press the power button on the front of the scanner.
[Ready] is displayed on the LCD.
2
Press the [Menu] button.
[Main Menu] is displayed on the LCD.
3
Press the [ ] or [ ] button and select [25: Doc Counting
Mode], then press the [Function/Enter] button to confirm.
[Doc Counting Mode (More documents)] is displayed on the LCD.
4
Load the documents on the hopper and press the [Scan]
button.
100 sheets will be loaded as an example here.
Scanning starts and [Count] will display "100".
Documents may not be counted correctly if a multifeed
occurs during scanning.
You can switch whether to enable multifeed detection by
pressing the [Eject] button. For more details, refer to
" About the Indicators" (page
5
Press the [Function/Enter] button to confirm.
[Doc Count Check Mode] is displayed on the LCD.
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
64).
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
TOP
Contents
Index
Appendix
Glossary
70