Konica Minolta Fujitsu fi-6800 Operating Manual page 75

Chapter 4 How to Use the Operator Panel
Item
5: Manual Feed Specify the waiting time to clear Manual Feed mode.
Timeout It can also be configured from the Software Operation Panel.
6: Paper Select whether to enable or disable Paper Protection.
Protection Enabling this setting reduces the risk of having the documents
damaged upon feeding errors, by stopping the scan when the
scanner detects a document that is unusually warped.
You can specify the level of sensitivity to detect an abnormal
feeding of documents when Paper Protection is enabled.
Documents are deformed (e.g. warped, bent, creased) when they
are not being fed by the rollers properly. To detect such a
symptom and stop the scan, select [1: Low] to only detect
documents that are highly deformed, and [3: High] to also detect
documents that are slightly deformed.
Paper Protection is disabled in Manual Feed mode.
Enable/Disable can also be configured from the scanner driver's
setup dialog box or the Software Operation Panel. In this case,
priority is given to the scanner driver setting unless you have
prioritized the operator panel setting.
Sensitivity can also be configured from the Software Operation
Panel. Priority is given to the scanner driver setting unless you
have prioritized the operator panel setting.
Description Setting/Value
- : No settings/values
SCSI or USB Connector 1:
5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100,
110, 120, 180, 240, 300, 360, 420, 480,
540, 600, 900, 1200, 1500, 1800, 1999
(seconds)
SCSI or USB Connector 2:
5, 10, 20, 30 (seconds)
1: Enable
2: Disable
Sensitivity:
1: Low
2: Normal
3: High
TOP
Contents
Factory Default
Index
Introduction
10
Scanner
Overview
How to Load
Documents
Configuring
2: Disable
the Scan
Settings
Sensitivity:
2: Normal
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
75