Chapter 7 Replacing Consumables
5
Close the ADF.
For information on how to close the ADF, refer to
Closing the ADF" (page
20).
Be careful not to have your fingers caught
when the ADF closes.
Do not close the ADF while the roller cover is open.
Confirm that the pick rollers are installed properly.
When the pick rollers are not installed properly, it
causes feeding errors such as paper jams.
6
Reset the pick roller counter.
Reset the counter by one of the following methods.
Select [23: Show/Clear Counters] from the [Main Menu] on the
operator panel, then reset the counter.
For more details, refer to
"4.2 Main Menu" (page
Start up the Software Operation Panel and reset the counter. For
more details, refer to
"Resetting the counters" (page
"1.5 Opening/
65).
183).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
133