Konica Minolta Fujitsu fi-6800 Operating Manual page 67

Chapter 4 How to Use the Operator Panel
■Operational settings
Menu Function
/Enter
Send to Clear
Check
/Pause /Back
[ ] / [ ] Button
Stop
[Function/Enter] Button
Scan
Counter
iMFF Reset Eject
[ ] / [ ] Button
[Function/Enter] Button
Power Button
[Menu] Button
1
Press the power button on the front of the scanner.
[Ready] is displayed on the LCD.
2
Press the [Menu] button.
[Main Menu] is displayed on the LCD.
3
Press the [ ] or [ ] button and select a setting item, then
press the [Function/Enter] button to confirm.
For more details about the setting items, refer to
in the Main Menu" (page 74).
The selected item is displayed on the LCD.
4
Press the [ ] or [ ] button and select a parameter, then
press the [Function/Enter] button to confirm.
For more details about the setting parameters, refer to
Configurable in the Main Menu" (page
If [Main Menu] is displayed on the LCD, it indicates that the setup
has been completed.
If the LCD displays a setting item, repeat step
[Main Menu] screen.
Scanner
Overview
How to Load
"Items Configurable
Documents
Configuring
the Scan
Settings
"Items
How to Use
74).
the Operator
Panel
4 until it shows the
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
TOP
Contents
Index
Introduction
Appendix
Glossary
67