[Pick Speed]; Setting The Speed To Feed The Documents Pick Speed] - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 9 Operational Settings
Setting the Speed to Feed the Documents

[Pick Speed]

When a multifeed or paper jam occurs frequently, the
symptom may be improved by slowing down the speed in
which the documents are fed (pick speed).
This setting is effective for scanning thin papers.
1
Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page
2
From the listing on the left, select [Device Setting 2]
[Pick Speed].
3
Select the paper feeding speed (pick speed).
Normal: Normal paper feeding speed
Slower: Slower than normal paper feeding speed
Note that it takes more time for scanning as the paper
feeding speed slows down.
This setting can also be configured from the operator
panel.
170).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
195