The Operator; Configuring; Panel; Various Ways - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 2 How to Load Documents
3
Adjust the stacker extension to the document length, and
pull up the paper stop.
For information on how to set the stacker, refer to
Setting" (page 24).
4
Start up an application for scanning and perform a scan.
For information on how to scan using ScandAll PRO, refer to "How to
Use ScandAll PRO".
■Setting the documents by the left or right side
of the hopper
"1.8 Stacker
1
Slide the hopper side guides to their outermost positions.
2
Set the documents so that the smallest document can be
picked by the pick rollers.
Set the documents with the front side (scanning side) facing up.
Hopper Side Guide
Pick Roller
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents

Configuring

the Scan
Settings
How to Use

the Operator

Panel

Various Ways

to Scan

Daily Care

Replacing

Consumables

Troubleshooting

Operational
Settings
Appendix
Glossary
37