Konica Minolta Fujitsu fi-6800 Operating Manual page 179

Chapter 9 Operational Settings
Item Description
Imprinter selection Specify which imprinter to use when
you have installed both Front-Side
Imprinter and Back-Side Imprinter.
It can also be configured from the
scanner driver's setup dialog box.
Note that priority is given to the
scanner driver setting.
Timeout for manual Specify the waiting time to cancel
feeding manual feeding.
It can also be configured from the
operator panel.
Paper Protection Specify whether to enable or disable
Paper Protection.
Enabling this setting reduces the
risk of having the documents
damaged upon feeding errors, by
stopping the scan when the scanner
detects a document that is unusually
warped.
Paper Protection is disabled in
Manual Feed mode.
It can also be configured from the
scanner driver's setup dialog box or
the operator panel. Note that priority
is given to the scanner driver setting
unless you have prioritized the
operator panel setting.
Setting/Value
Normal (obey Host specification) /
Forcibly select Front-Side Imprinter /
Forcibly select Back-Side Imprinter
(only when the imprinter option is
installed)
SCSI or USB Connector 1:
5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100,
110, 120, 180, 240, 300, 360, 420, 480,
540, 600, 900, 1200, 1500, 1800, 1999
(seconds)
SCSI or USB Connector 2:
5, 10, 20, 30 (seconds)
Enable / Disable
Factory Default SCSI or USB
Connector 1
: Configurable
-: Not configurable
Normal
(obey Host
specification)
10 seconds
Disable
TOP
Contents
SCSI or USB
Index
Connector 2
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
179