Isis Scanner Driver - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 3 Configuring the Scan Settings

3.2 ISIS Scanner Driver

The ISIS scanner driver is a software driver which conforms to
the ISIS standard. This driver can be used with an application
that supports ISIS to perform scanning.
Normally, the scanner driver is launched via an application,
and then the scan settings are configured in the setup dialog
box of the driver (some applications may not display the setup
dialog box).
Ways to launch the scanner driver differ depending on the
application.
For more details, refer to the manual or the Help files of the
application.
Settings for the ISIS scanner driver are configured in the
above dialog box.
For more details, refer to the ISIS Scanner Driver Help.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
53