Konica Minolta Fujitsu fi-6800 Operating Manual page 183

Chapter 9 Operational Settings
Item
Brake Roller Approximate number of sheets
scanned since the last replacement of
brake roller (in units of 500)
Pick Roller Approximate number of sheets
scanned since the last replacement of
pick rollers (in units of 500)
Separator Roller Approximate number of sheets
scanned since the last replacement of
separator roller (in units of 500)
Assist Roller Approximate cumulative number of
sheets fed (in units of 500)
Ink Level: Front Remaining ink in the print cartridge of
the Front-Side Imprinter (sold
separately).
(Displayed only when the imprinter
option is installed.)
Ink Level: Back Remaining ink in the print cartridge of
the Back-Side Imprinter (sold
separately).
(Displayed only when the imprinter
option is installed.)
■
Description
When you have replaced the consumables or performed
cleaning, reset the corresponding counters as follows:
1
2
Resetting the counters
Click the [Clear] button for the consumable(s) that you
replaced.
The counter value is reset to 0.
For ink level, it is reset to 100.
The assist roller counter cannot be cleared. It requires a
service engineer to clear the counter. For more details, contact
your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
In the Software Operation Panel, click the [OK] button.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
183