Ground Color] - Konica Minolta Fujitsu fi-6800 Operating Manual

Chapter 9 Operational Settings
Scanning Documents with Dark Background
Color
[Scan Setting for Document in Dark Ground
Color]
Configure this setting when the edges of a document with dark
background color are not detected accurately. You can specify
the level of sensitivity to accurately detect the edges of
documents with dark backgrounds.
1
Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page
2
From the listing on the left, click [Device Setting 2]
[Scan Setting for Document in Dark Ground Color], then
select [Enable].
3
Specify the [Density of background color].
When you increase the [Density of background color], it
may falsely detect the edges due to the dust inside the
paper path.
This setting appears ONLY when Kofax VRS is used.
170).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
204