Double Vlan Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack

Double VLAN Settings

This window is used to enable or disable the double VLAN State settings.
To view this window, click L2 Features > VLAN > Double VLAN, as shown below.
Choose Enabled using the pull-down menu and click Apply. The user will be prompted with the following warning window.
Click OK to continue.
After being prompted with a success message, the user will be presented with this window to configure for Double VLANs.
Parameters shown in the previous window are explained below:
Parameter Description
Double VLAN Use the pull-down menu to enable or disable the Double VLAN function on this Switch. Enabling
State the Double VLAN will return all previous VLAN configurations to the factory default settings and
remove Static VLAN configurations from the GUI.
SPVID The VLAN ID number of this potential Service Provider VLAN.
VLAN Name The name of the VLAN on the Switch.
TPID The tagged protocol ID of the corresponding VLAN that will be used in identification of this
potential Double VLAN, written in hex form.
The user may view configurations for a Double VLAN by clicking its corresponding View button, which will display the
following read-only window.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 3 - 10 Double VLAN State Settings window
Figure 3 - 11 Alert window
Figure 3 - 12 Double VLAN State Settings window
149