Igmp Snooping Group; Igmp Snooping Data Driven Group - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack

IGMP Snooping Group

This window allows the Switch's IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read the
Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view this window, click Monitoring > IGMP Snooping Group, as shown below.
The user may search the IGMP Snooping Group Table by VLAN name by entering it in the top left hand corner and clicking
Find. To view all entries click View All Entry.
NOTE: To configure IGMP snooping for the xStack
L2 Features folder and select IGMP Snooping. Configuration and other information
concerning IGMP snooping may be found in Section 7 of this manual under IGMP
Snooping.

IGMP Snooping Data Driven Group

The dynamic IP Multicast Learning function is to forward un-registered IP multicast data packets to router ports without any
clients report on the IP multicast group.
To view this window, click Monitoring > IGMP Snooping Data Driven Group, as shown below.
Figure 7 - 32 IGMP Snooping Data Driven Group Table window
The functions are used in the MAC address table:
Parameter Description
VLAN Name
Enter a VLAN Name to be browsed by or to be deleted.
VID List
Enter a list of VLAN ID to be browsed by or to be deleted.
IP Address
Enter a IP address to be browsed by or to be deleted.
To search for IGMP snooping data driven group, click Find. To view all entries, click View All Entries. To delete an entry, enter
the information and click Clear. To remove all entries, click Clear All Entries.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 7 - 31 IGMP Snooping Group Table window
®
DGS-3400 Series switch, go to the
379