Bandwidth Control; Bandwidth Control Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack
Class ID
Use the pull-down menu to select the Switch's hardware priority queue. The switch has seven
hardware priority queues available.
Click Apply to implement the changes.

Bandwidth Control

The Bandwidth Control section includes Bandwidth Control Settings and Per Queue Bandwidth Control Settings. Bandwidth
Control is to limit a port's bandwidth. The RX and TX rate can be configured separately.

Bandwidth Control Settings

The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port.
To view this window, click QoS > Bandwidth Control > Bandwidth Control Settings, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
226