802.1X User Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack
IPv6 Address
Authentic UDP Port
(1-65535)
Accounting UDP Port
(1-65535)
Key
Confirm Key
Timeout (1-255)
Retransmit (1-20)
Status
Click Apply to implement the changes.

802.1X User Settings

This window allows the user to set different local users on the Switch and set a global limitation on the maximum number of users
that can be learned via 802.1X authentication.
To view this window, click Security > 802.1X > 802.1X User Settings, as shown below.
This screen allows setting of the following features:
Parameter
Max User (1-4000)
User Name
Password
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Click the radio button and enter the RADIUS IPv6 address.
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Set the RADIUS account server(s) UDP port. The default port is 1813.
Set the key the same as that of the RADIUS server.
Confirm the shared key is the same as that of the RADIUS server.
Enter the timeout value in seconds (1 to 255). The default value is 5.
Set the count for retransmit(1 to 20).The default value is 2.
This allows the user to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
Figure 6 - 28 802.1X User Setting window
Description
Enter the maximum number of users to be allowed. Check the No Limit check box to specify
that there will be the maximum number of users. By default there is no limit.
Enter the User Name of the new profile to be created.
Enter a password for the new user.
298