D-Link DGS-3427 - xStack Switch - Stackable Product Manual page 78

x Stack
To search for an entry, enter the Interface Name and click Find. To display all current entries on the Switch click View All. To
change a current entry, click the corresponding Modify button of the entry, revealing the following window to configure:
The following fields are displayed or can be configured:
Parameter
Interface Name
Hops Count (1-32)
State
Click Apply to implement the changes. To return to the DHCPv6 Relay Interface Settings window, click the
Relay Interface Entries link.
To see server addresses of an interface, click the corresponding View button to see the following window:
The following fields are displayed or can be configured:
Parameter
Interface Name
DHCPv6 Server
Address
Click Apply to implement the changes. To remove any entry, click the corresponding
Interface Settings window, click the
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 73 DHCPv6 Relay Interface Settings - Edit window
Description
Display the IPv6 relay interface name.
This field allows an entry between 1 and 32 to define the maximum number of router
hops DHCPv6 messages can be forwarded across. The default hop count is 4.
Use the pull-down menu to enable or disable DHCPv6 relay on.
Figure 2 - 74 DHCPv6 Relay Interface Settings - View window
Description
Display the IPv6 relay interface name.
Enter the IPv6 destination address to forward DHCPv6 packets.
Show All DHCPv6 Relay Interface Entries link.
69
Show All DHCPv6
button. To return to the DHCPv6 Relay