xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
802.1v Protocol VLAN
802.1v Protocol Group Settings
The table allows the user to create Protocol VLAN groups and add protocols to that group. The 802.1v Protocol VLAN
Group Settings supports multiple VLANs for each protocol and allows the user to configure the untagged ports of
different protocols on the same physical port. For example it allows the user to configure an 802.1Q and 802.1v
untagged port on the same physical port. The lower half of the table displays any previously created groups.
To view this window click L2 Features > 802.1v Protocol VLAN > 802.1v Protocol Group Settings:
The following fields can be set:
Parameter
Group ID
Group Name
Protocol
Protocol Value
(0-FFFF)
Click Add to make a new entry and Delete All to remove an entry.
802.1v Protocol VLAN Settings
The table allows the user to configure Protocol VLAN settings. The lower half of the table displays any previously
created settings.
To view this window click L2 Features > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings:
Figure 7- 14. 802.1v Protocol Group Settings window
Description
Select an ID number for the group, between 1 and 16.
This is used to identify the new Protocol VLAN group. Type an alphanumeric string of up to 32
characters.
This function maps packets to protocol-defined VLANs by examining the type octet within the
packet header to discover the type of protocol associated with it. Use the drop-down menu to
toggle between Ethernet_II, IEEE802.3_LLC and IEEE802.3_SNAP.
Enter a value for the Group.
80