D-Link DGS-3427 - xStack Switch - Stackable Product Manual page 274

x Stack
Figure 5 - 34 CPU Interface Filtering Configuration window (Packet Content)
This screen will aid the user in configuring the Switch to mask packet headers beginning with the offset value specified. The
following fields are used to configure the Packet Content Mask:
Parameter Description
Profile ID (1-5) Type in a unique identifier number for this profile set. This value can be set from 1 to 5.
Type Select profile based on Ethernet (MAC Address), IP address, IPv6 address or packet content
mask. This will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select Packet Content Mask to specify a mask to hide the content of the packet header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Offset This field will instruct the Switch to mask the packet header beginning with the offset value
specified:
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
• value (0-15) – Enter a value in hex form to mask the packet from the beginning of the
265