Table of Contents
Advertisement
®
xStack
NOTE: In order to use VLAN segmentation in conjunction with port trunk groups, first set the port trunk
group(s), and then configure the VLAN settings. To change the port trunk grouping with VLANs
already in place it is unnecessary to reconfigure the VLAN settings after changing the port trunk group
settings. VLAN settings will automatically change in conjunction with the change of the port trunk
group settings.
802.1Q VLAN Settings
The VLAN List tab lists all previously configured VLANs by VLAN ID and VLAN Name.
To view the following window, click L2 Features > VLAN > 802.1Q VLAN Settings, as shown below:
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To create a new 802.1Q VLAN or modify an existing 802.1Q VLAN, click the Add/Edit VLAN tab.
A new tab will appear, as shown below, to configure the port settings and to assign a unique name and number to the
new VLAN.
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-4 802.1Q VLAN Settings window
Figure 5-5 802.1Q VLAN Settings window
76
Advertisement
Table of Contents
