Mac Notification Settings; Tftp Services; Global Settings; Port Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack

MAC Notification Settings

MAC Notification is used to monitor MAC
addresses learned and entered into the forwarding
database.
To view this window, click Administration >
MAC Notification Settings, as shown on the right.

Global Settings

The following parameters may be viewed and
modified:
Parameter Description
State
Enable or disable MAC
notification globally on the
Switch
Interval (1- The time in seconds
2147483647 between notifications.
sec)
History size The maximum number of
(1-500) entries listed in the history
log used for notification. Up
to 500 entries can be
specified.

Port Settings

To change MAC notification settings for a port or
group of ports on the Switch, configure the
following parameters.
Parameter Description
Unit Choose the switch in the
switch stack for which to
configure these settings.
From / To Select a port or group of ports
to enable for MAC notification
using the pull-down menus.
State Enable or disable MAC
Notification for the ports
selected using the pull-down
menu.
Click Apply to implement the changes.

TFTP Services

Trivial File Transfer Protocol (TFTP) services allow the Switch's firmware to be upgraded by transferring a new firmware file
from a TFTP server to the Switch. A configuration file can also be downloaded into the Switch from a TFTP server. Switch
configuration settings can be saved and a history and attack log can be uploaded from the Switch to the TFTP server. The Switch
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 38 New MAC Notification Global Settings
44
window