Dhcpv6 Relay; Dhcpv6 Relay Global Settings; Dhcpv6 Relay Interface Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack
VID List
Click Apply to implement the changes.

DHCPv6 Relay

This section contains information for configuring DHCPv6 relay, including DHCP v6 Relay Global Settings and DHCPv6 Relay
Interface Settings.

DHCPv6 Relay Global Settings

This window is used to set up the DHCPv6 relay global status.
To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Global Settings as shown below.
The following fields can be configured:
Parameter
Global State
Hops Count (1-32)
Click Apply to implement the changes.

DHCPv6 Relay Interface Settings

This window displays the current DHCPv6 relay configurations.
To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Interface Settings as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Display the VLAN list.
Figure 2 - 71 DHCPv6 Relay Global Settings window
Description
This field can be toggled between Enabled and Disabled using the pull-down menu. It is
used to enable or disable the DHCPv6 Relay service on the Switch. The default is
Disabled.
This field allows an entry between 1 and 32 to define the maximum number of router
hops DHCPv6 messages can be forwarded across. The default hop count is 4.
Figure 2 - 72 DHCPv6 Relay Interface Settings window
68