Port Auto Negotiation Information - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack
Parameter Description
Unit Select the unit to configure.
From / To
These two fields are use to select a port or range of ports.
Medium Type
If configuring the Combo ports, this defines the type of transport medium to be used, whether
Copper or Fiber.
Description Enter the description for the selected port(s).
Click Apply to set the descriptions in the Port Description Table.

Port Auto Negotiation Information

This window allows the user to view the current configurations of all the ports on the Switch. Use the drop-down menu to select
which unit to view.
To view this window, click Administration > Port Configuration > Port Auto Negotiation Information, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
28