D-Link DGS-3427 - xStack Switch - Stackable Product Manual page 184

x Stack
The following parameters can be configured:
Parameter
MLD Multicast Router Only
MLD Snooping Data Driven
Learning Settings (1-511)
Click Apply to implement the changes.
Click the corresponding Modify button in the MLD Snooping Settings table to open the window, as shown below.
The following parameters may be viewed or modified:
Parameter
VID
VLAN Name
Query Interval (1-65535)
Max Response Time (1-25)
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Description
Use the pull-down menu to enable or disable the MLD multicast router.
Enter a value between 1 and 511 for data driven max learning entry.
Figure 3 - 41 MLD Snooping Settings – Edit window
Description
This is the VLAN ID that, along with the VLAN Name, identifies the VLAN for which
to modify the MLD Snooping Settings.
This is the VLAN Name that, along with the VLAN ID, identifies the VLAN for which
to modify the MLD Snooping Settings.
The Query Interval field is used to set the time (in seconds) between transmitting
MLD queries. Entries between 1 and 65535 seconds are allowed. Default = 125.
This determines the maximum amount of time in seconds allowed to wait for a
175