Mirror; Port Mirror Global Settings; Port Mirror Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

x Stack
form, or if the password has been converted to encrypted form by the last enable password
encryption command, the password will still be in encrypted form and cannot be reverted back
to plaintext form.
Click Apply to implement the changes.

Mirror

This section contains information for mirroring port configurations, including Port Mirror Global Settings and Port Mirror
Settings.

Port Mirror Global Settings

This window is used to configure the port mirror status without having to modify the settings in Port Mirror Settings window.
To view this window, click Administration > Mirror > Port Mirror Global Settings, as shown below.
The following parameters can be configured:
Parameter
Porting Mirror
Global State
Click Apply to implement the changes.

Port Mirror Settings

The Switch supports up to four port mirror groups. It allows to copy frames transmitted and received on a port and redirect the
copies to another port. You can attach a monitoring device to the mirrored port, such as a sniffer or an RMON probe, to view
details about the packets passing through the first port. This is useful for network monitoring and troubleshooting purposes.
To view this window, click Administration > Mirror > Port Mirror Settings, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 25 Port Mirror Global Settings window
Description
Use the pull-down menu to enable or disable the port mirror status.
34