Erps; Erps Global Settings - D-Link DGS-3427 - xStack Switch - Stackable Product Manual

Layer 2 managed gigabit ethernet switch
Hide thumbs Also See for DGS-3427 - xStack Switch - Stackable:
Table of Contents

Advertisement

x Stack
The following fields can be set:
Parameter
Unit
From / To
CVID List
Action
SVID(1-4094)
Priority
Click Apply to create a new entry, click Find By Ports to view the current entries by ports and Delete All to remove all VLAN
Translation entries. To view the VLAN translation table, click the hyperlinked

ERPS

The Switch supports ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) to provide a reliable mechanism of malfunction
recovery in an Ethernet ring topology network.

ERPS Global Settings

This window is used to enable global ERPS function on the Switch. When both the global state and the specified ring ERPS state
are enabled, the specified ring will be activated. The global ERPS function cannot be enabled when any ERPS ring on the device
is enabled and the integrity of any ring parameter is not available. For each ring, with the individual ring state enabled and ERPS
enabled globally, the following integrity will be checked:
1.
The Ring-Automatic Protection Switching (R-APS) VLAN is created.
2.
The Ring port is a tagged member port of the R-APS VLAN.
3.
The Ring Protection Link (RPL) port is specified if the RPL owner is enabled.
The default state is Disabled.
To view this window, click L2 Features > ERPS > ERPS Global Settings, as shown below.
The following fields can be set:
Parameter
Global Status
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Description
Select the unit you wish to configure.
A consecutive group of ports that are part of the VLAN configuration starting with the selected
port.
The customer VLAN ID List to which the tagged packets will be added.
Specify if you want SPVID packets to be added or replaced.
This configures the VLAN to join the Service Providers VLAN as a tagged member.
Select a priority for the VLAN ranging from 0-7. With 7 having the highest priority.
Figure 3 - 76 ERPS Global Settings window
Description
Enable the global ERPS function on a switch.
Show All VLAN Translation
212
Table.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents