D-Link DGS-3427 - xStack Switch - Stackable Product Manual page 46

x Stack
Click to remove the corresponding entry.
To add a new system log server, click the Add button, and the window below appears:
To modify an existing system log server, click the Modify button of the corresponding entry, and the window below appears:
The following parameters are displayed or can be configured:
Parameter
Index(1-4)
Server IP
Severity
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 29 System Log Host window
Figure 2 - 30 Configure System Log Server - Add window
Figure 2 - 31 Configure System Log Server - Edit window
Description
System log server settings index (1-4).
The IPv4 address of the System log server.
This drop-down menu allows you to select the level of messages that will be sent. The options
37