D-Link DGS-3427 - xStack Switch - Stackable Product Manual page 358

x Stack
To configure the settings by port, click the corresponding Modify button, which will display the following window:
To set the JWAC on individual ports for the Switch, complete the following fields:
Parameter
Unit
Port List
State
Mode
Max Authenticating
Host (0-50)
Aging Time (1-1440
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 6 - 83 JWAC Port Table Parameter - Add window
Figure 6 - 84 J JWAC Port Table Parameter - Edit window
Description
Choose the Unit ID of the switch in the switch stack to configure.
Lists the range of Ports that will be configured in this window.
This parameter specifies the state of the configured ports.
Use the drop-down menu to select the mode, choose either Port Based or Host Based.
This parameter specifies the maximum number of host process authentication attempts
allowed on each port at the same time.
This parameter specifies the period of time a host will keep in authenticated state after it
successes to authenticate. Enter a value between 1 and 1440 minutes. The default setting is
349