Replacing The 5V/12V Power Supply - Spectra Logic T-Series Spectra T120 User Manual

Replacing the 5V/12V Power Supply

1. Use a #2 Phillips screwdriver to loosen the screw in the upper right corner of
the malfunctioning power supply (Figure 5-3).
2. Pull outward on the power supply handle (Figure 5-4).
3. Place the old power supply to the side for return to Spectra Logic.
4. Place the new power supply into the empty slot and push it in gently.
5. Use a #2 Phillips screwdriver to tighten the screw on the upper right corner of
the power supply.
6. If necessary, use your backup software to restart any backups that were stopped
when the power supply malfunctioned.
7. You are now ready to package the power supply and ship it to Spectra Logic for
inspection; proceed to Chapter 9. Returning Components.
Chapter 5. Power Supply Replacement
Figure 5-3 The power supply screw.
Figure 5-4 Pulling out the power supply.
17