Spectra Logic T-Series Spectra T120 Important Information

Installing LTO-3 Drives in a Spectra T120 Library
The Spectra T120 library firmware code level must be at BlueScale9.1.6-20050629F or higher in order to use
LTO-3 drives in a Spectra T120 library.
Open the library door and check the type of library robotics installed in your library.
Molded Picker
If you have a molded picker, your EC level is automatically satisfactory.
If you have a round picker, check the EC levels of the components.
•
The EC number for the robotics is located on the picker tray next to the EE port.
The EC level of the robotics must be at EC14 or higher.
•
The EC number for the picker is located on the bottom of the picker.
The EC level of the picker must be at EC09 or higher.
If your library does not meet both of the above criteria for firmware and robotics EC levels, do not attempt
to install the LTO-3 drive(s). Contact Spectra Logic Technical Support for further instructions.

Important Information :

Library Firmware

Library Robotics

CAUTION:
PN 90950007 Revision B
Round Picker