Locating the Malfunctioning Power Supply
If you only have one power supply installed, proceed to Replacing the 5V/12V Power
Supply on page 17.
If you have both power supplies installed, follow these steps to tell which power
supply is malfunctioning.
1. Go to the rear of the library.
2. Locate the 5V/12V power supplies; see Component Location on page 7.
3. Check the power supply LEDs, as shown in Figure 5-2.
Figure 5-2 The 5V/12V power supply LEDs.
4. Locate the power supply on which the DC Output LED is off.
Chapter 5. Power Supply Replacement
DC Output
Solid green during normal operation.
Off (unlit) if the power supply is malfunctioning.
AC Input
Solid green during normal operation.
Off (unlit) if the power supply is malfunctioning.
16