Spectra Logic T-Series Spectra T120 User Manual page 29

6. Slide the coupler several inches upwards on the upper HAX rod and tighten one
screw to hold the coupler temporarily in place.
7. Carefully rotate the VAX column counter-clockwise so that the back of the VAX
column faces outward and can clear the LC/EE port support plate to the left, as
shown in Figure 7-11. (If necessary, slide the assembly back a few inches.)
Chapter 7. Robotic Assembly Replacement
Figure 7-10 The coupler.
Figure 7-11 The back of the VAX column.
29