Assembling The New Picker - Spectra Logic T-Series Spectra T120 User Manual

Assembling the New Picker

Preparing to Install the Picker on the Base
1. Unpack the new robotic assembly.
2. Place the new robotic assembly horizontally on your work surface.
3. Gently move the picker head to the top of the VAX column.
4. Attach a small binder clip to the VAX drive belt, so that the picker head remains
at the top of the VAX column.
Figure 7-18 The belt (outlined in white, above) clipped in place.
Chapter 7. Robotic Assembly Replacement
34