Replacing The Air Filter - Spectra Logic T-Series Spectra T50 User Manual

Spectra logic t-series spectra t50: user guide
Hide thumbs Also See for T-Series Spectra T50:
Table of Contents

Advertisement

4. Select Start Moves. The TAP opens and a Feedback screen appears.
5. Remove the cleaning tape.
6. Place the magazine back inside the library.
7. Select Continue to close the TAP.

Replacing the Air Filter

If your library has a removable air filter, you should inspect the filter at least once
every three months. If the air filter is clogged, replace it immediately.
Caution: Some environments require more frequent filter inspection and
replacement. If a filter gets clogged quickly, consider moving
the library to a more dust-free location.
For information on how to order replacement filters, see Air Filters on page 123.
To replace the air filter:
1. Remove the filter panel
by pulling outward on the
right side of the filter
(Figure 10-1).
2. Locate the filter element on
the back of the filter panel.
Chapter 10. Maintaining the Library and Drives
Figure 10-1 The air filter being removed.
88

Advertisement

Table of Contents
loading

Table of Contents