Spectra Logic T-Series Spectra T120 User Manual page 39

3. Carefully lift the assembly to place it in the library.
Warning:
The assembly is heavy and can be slightly awkward to handle;
you may want to ask someone to help you carry the assembly.
Note:
If the assembly base does not align with the locating pin in the
library, pull the assembly back out of the library and confirm that
nothing is blocking the base. Then insert the base so that the pin
aligns with the pin guide.
4. Have a second person carefully move the motor control cable up and away from
the base before you slide in the assembly.
5. Slide the assembly part of the way into the library. Use one hand to make sure
the ribbon cable doesn't catch on the LC/EE plate. Stop before the top of the
VAX column reaches the top of the library. The second person can then release
the motor control cable.
Figure 7-25 Sliding in the assembly and holding down the ribbon
cable, with a second person holding the motor cable up and out of the
way.
Chapter 7. Robotic Assembly Replacement
39