Spectra Logic T-Series Spectra T120 User Manual page 40

6. Locate the upper VAX guide rails inside the top of the library; align the bracket
at the top of the VAX column so that the bracket's rollers fit into the guide rails,
then slide in the unit.
Figure 7-26 The track along the inside top of the library (left) and the bracket to be aligned (right).
7. With the robotic assembly inserted into the library, attach the assembly to the
library by tightening the one thumbscrew and two quarter-turn screws, shown
in Figure 7-27. This attaches the bottom of the assembly to the library chassis.
Chapter 7. Robotic Assembly Replacement
Figure 7-27 The three chassis screws.
40