Default Settings - Dell PowerEdge M420 Configuration Manual

Default Settings

This section describes the default settings for many of the software features
on the PowerConnect M6220, M6348, M8024, and M8024-k switches.
Table 6-1. Default Settings
Feature
IP address
Subnet mask
Default gateway
DHCP client
Management VLAN ID
VLAN 1 Members
SDM template
Simple mode
Users
Minimum password length
IPv6 management mode
SNTP client
Global logging
Switch auditing
CLI command logging
Web logging
Default
None
None
None
Enabled on out-of-band (OOB) interface.
Disabled on Management VLAN (inband
management ports).
1
All switch ports
Dual IPv4 and IPv6 routing
Disabled—PCM6220, PCM6348, and
PCM8024
Enabled —PCM8024-k
root
- password: calvin
- level: 15
8 characters
Enabled
Disabled
Enabled
Disabled
Disabled
Disabled
Default Settings
6
111