Dell PowerEdge M420 Configuration Manual page 104

Table 5-1. Command Mode Overview
Command Mode
User EXEC
Privileged EXEC From User
Global
Configuration
Interface
Configuration
VLAN Config
104
Using the Command-Line Interface
Access Method Command Prompt
The user is
console>
automatically in
User EXEC
mode unless the
user is defined as
a privileged user.
console#
EXEC mode,
enter the enable
command
From Privileged
console(config)#
EXEC mode, use
the configure
command.
From Global
console(config-
Configuration
if)#
mode, use the
interface
command and
specify the
interface type
and ID.
From Global
console(config-
Configuration
vlan)#
mode, use the
vlan database
command.
Exit or Access
Previous Mode
logout
Use the exit
command, or press
Ctrl-Z to return to
User EXEC mode.
Use the exit
command, or press
Ctrl-Z to return to
Privileged EXEC
mode.
To exit to Global
Configuration
mode, use the exit
command, or press
Ctrl-Z to return to
Privileged EXEC
mode.
To exit to Global
Configuration
mode, use the exit
command, or press
Ctrl-Z to return to
Privileged EXEC
mode.