Dell PowerEdge M420 Configuration Manual page 113

Table 6-1. Default Settings (Continued)
Feature
Protected Ports (Private VLAN Edge)
Flow Control Support (IEEE 802.3x)
Head of Line Blocking Prevention
Maximum Frame Size
Auto-MDI/MDIX Support
Auto Negotiation
Advertised Port Speed
Broadcast Storm Control
Port Mirroring
LLDP
LLDP-MED
MAC Table Address Aging
Cisco Protocol Filtering (LLPF)
DHCP Layer 2 Relay
Default VLAN ID
Default VLAN Name
GVRP
GARP Timers
Voice VLAN
Guest VLAN
RADIUS-assigned VLANs
Double VLANs
Spanning Tree Protocol (STP)
STP Operation Mode
Optional STP Features
Default
None
Enabled
Disabled
1500 bytes
Enabled
Enabled
Maximum Capacity
Disabled
Disabled
Enabled
Disabled
300 seconds (Dynamic Addresses)
No protocols are blocked
Disabled
1
Default
Disabled
Leave: 60 centiseconds
Leave All: 1000 centiseconds
Join: 20 centiseconds
Disabled
Disabled
Disabled
Disabled
Enabled
IEEE 802.1w Rapid Spanning Tree
Disabled
Default Settings
113