The 10GBase-T module has two or three LEDs per port, the SFP+ module
has one LED per port, and the Stacking/10 GbE module does not have any
10GBase-T Module LEDs
Each 10GBase-T Module has three LEDs.
Table 3-4 contains 10GBase-T port LED definitions for the PowerConnect
M6220 and M8024.
Table 3-4. 10GBase-T Module Definitions
On the PowerConnect M6220, the module must be inserted into Bay 2 to
operate. When the module is inserted into Bay 1, it will not operate and the
Wrong Bay LED is solid red.
The link is operating at 10 Gbps.
The link is operating at a speed other
than 10 Gbps.
Module is in the wrong bay.