Writing Managed Object Values; Configuring Contact And Location Information Using Snmp - Dell S6100 Configuration Manual

The following example shows reading the value of the next managed object.
> snmpgetnext -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1.3.0
SNMPv2-MIB::sysContact.0 = STRING:
> snmpgetnext -v 2c -c mycommunity 10.11.131.161 sysContact.0
The following example shows reading the value of the many managed objects at one time.
> snmpwalk -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1
SNMPv2-MIB::sysDescr.0 = STRING: Dell
Dell Operating System Version: 1.0
Dell Application Software Version: E_MAIN4.9.4.0.0
Copyright (c) 1999-2014 by Dell
Build Time: Mon May 12 14:02:22 PDT 2008
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.6027.1.3.1
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (32920954) 3 days, 19:26:49.54
SNMPv2-MIB::sysContact.0 = STRING:

Writing Managed Object Values

You may only alter (write) a managed object value if your management station is a member of the same community as the SNMP agent,
and the object is writable.
Use the following command to write or write-over the value of a managed object.
• To write or write-over the value of a managed object.
snmpset -v version -c community agent-ip {identifier.instance | descriptor.instance}syntax
value
Example of Writing the Value of a Managed Object
> snmpset -v 2c -c mycommunity 10.11.131.161 sysName.0 s "R5"
SNMPv2-MIB::sysName.0 = STRING: R5
Configuring Contact and Location Information using
SNMP
You may configure system contact and location information from the Dell Networking system or from the management station using
SNMP.
To configure system contact and location information from the Dell Networking system and from the management station using SNMP, use
the following commands.
• (From a Dell Networking system) Identify the system manager along with this person's contact information (for example, an email
address or phone number).
CONFIGURATION mode
snmp-server contact text
You may use up to 55 characters.
The default is None.
• (From a Dell Networking system) Identify the physical location of the system (for example, San Jose, 350 Holger Way, 1st floor lab, rack
A1-1).
CONFIGURATION mode
snmp-server location text
You may use up to 55 characters.
The default is None.
• (From a management station) Identify the system manager along with this person's contact information (for example, an email address
or phone number).
792 Simple Network Management Protocol (SNMP)
Real Time Operating System Software