Configuring Snmp (Web); Snmp Global Parameters - Dell PowerConnect 8024 User Configuration Manual

Configuring SNMP (Web)

This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the SNMP agent on a
PowerConnect 8024/8024F switch. For details about the fields on a page, click
at the top of the page.
NOTE:
For some features, the control to enable or disable traps is available from
a configuration page for that feature and not from the Trap Manager pages that
this chapter describes.

SNMP Global Parameters

Use the Global Parameters page to enable SNMP and Authentication
notifications.
To display the Global Parameters page, click System → SNMP → Global
Parameters in the navigation panel.
Figure 12-1. SNMP Global Parameters
Configuring SNMP
303