Table of Contents
Advertisement
Removing a PCI Riser Card
1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see
3. Remove any add-in cards from the PCI riser card. For instructions, see
in
Card".
4. Remove the two screws securing the PCI Riser Card (see letter A).
5. Remove from the riser card from riser assembly (see letter B).
Installing a PCI Riser Card
1. Place the riser card onto the riser assembly (see letter A).
2. Secure the riser card using the two screws (see letter B).
Installing and Removing a Slimline Optical Drive
Caution: The slimline optical drive is NOT hot-swappable. Before removing or replacing the drive,
you must first take the server out of service, turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug the power cord from the system or
wall outlet.
To maintain proper system cooling, a filler panel must be installed if you do not install a device at
this location.
Installing a Slimline Optical Drive
1. Install the plastic guide onto the back of the drive and attach with two screws as shown (see
letter A).
®
Intel
Server System R1000SP Service Guide
Figure 51. Removing the PCI Riser Card
Figure 52. Installing the PCI Riser Card
Hardware Installations and Upgrades
"Removing the PCI Riser
"Removing a PCI Add-
Assembly".
31
Advertisement
Table of Contents
