Installing the Replacement PCI Express* Riser Card
To install the replacement PCI Express* riser card, follow these steps:
1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see
Assembly" on page
3. Remove any add-in cards from the PCI riser connector. For instructions, see
"Removing a PCI Add-in Card" on page
4. Position the riser card in the assembly such the holes on the card and the
assembly align.
5. Secure the riser card using two screws (see
6. Install the PCI add-in card(s) if desired. For instructions, see
in Card" on page
7. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
8. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
Installing and Removing a PCI Add-in Card
The instructions below describe how to install and remove a PCI add-in card.
Installing a PCI Add-in Card
To install a PCI add-in card, follow these steps:
1. Remove the PCI riser assembly. For instructions, see
Assembly" on page
44
41.
Figure 29. Installing the Replacement PCI Express* Riser Card
44.
41.
"Removing the PCI Riser
45.
Figure
29).
AF003041
"Installing a PCI Add-
42.
"Removing the PCI Riser
®
Intel
Server System SR1600UR Service Guide