Initializing Logical Drives,
Individual Initialization
Step
1
Choose the Objects option from the MegaRAID Manager main menu. Choose the Logical
Drive option from the Objects menu, shown below:
2
Select the logical drive to be initialized. The following appears:
3
Choose Initialize from the Action menu. The progress of the initialization appears as a
graph on the screen.
4
When initialization completes, press any key to display the previous menu.
Using Logical Drives in the Operating System
For information on an operating system other than DOS, see the software
manual accompanying the drivers for that operating system. To use the logical
drive(s) in DOS:
Step
1
Exit MegaRAID Manager and reboot the computer.
2
Run DOS FDISK and configure one or more partitions using the logical
drives.
3
Format the partitions using the FORMAT command.
MegaRAID Configuration Software Guide
80
Continued
Action
Action