LSI SCSI 320-0 Configuration page 20

Configuration Utility Objects Menu,
Logical Drive Choose this option from the Configuration Utility Objects menu to select a
logical drive and to perform the listed actions.
Logical Drive
Option
Initialize
Check
Consistency
View/Update
Parameters
MegaRAID Configuration Software Guide
12
Continued
Description
Initializes the selected logical drive. Do this for every logical
drive that is configured.
Verifies the correctness of the redundancy data in the selected
logical drive. This option is available only if RAID level 1, 3, or 5
is used. MegaRAID automatically corrects any differences found
in the data.
Displays the properties of the selected logical drive. You can
modify the cache write policy, read policy, and the I/O policy and
can enable Virtual Sizing from this menu.
Cont'd