Power Console Plus Icons,
The Clear Configuration icon is shown to the left. Click on this icon to clear the
RAID configuration on the currently selected controller. A confirmation screen
will appear:
Click on OK in the confirmation screen to reset the configuration.
Choosing Clear Configuration will clear all channels on the
Clear Configuration will reset the entire MegaRAID adapter.
If the operating system is located on a drive attached to the
MegaRAID adapter, the system will lock up.
The Adapter Properties icon is shown to the left. Click on this icon to display the
properties of the selected adapter, as shown on the sample screen below:
MegaRAID Configuration Software Guide
102
Continued
Warning
MegaRAID adapter.
Cont'd