De-Registering And Re-Registering Under Power Console Plus - LSI SCSI 320-0 Configuration

De-registering and Re-registering under Power Console Plus

If the registration server fails or is shut down, the other RAID servers or clients
must log back into the registration server after the registration server has been
restored to an online condition. RAID servers can register into the registration
servers without resetting. The online command instructions for registering and
de-registering under each operating system are:
Operating
System
Windows NT 4.x,
Windows 2000
Novell NetWare
MegaRAID Configuration Software Guide
98
De-registering
Select RAID Server on the taskbar
using a right mouse click and select
CLOSE.
Type
UNLOAD RAIDSERV
at the console prompt and press
<Enter>.
Re-registering
Execute MegaRAID Server
from the MegaRAID Console
menu.
Type
LOAD RAIDSERV
at the console prompt and
press <Enter>.