Configuring Arrays And Logical Drives121; Step 1 Start Power Console Plus; Configuring Arrays And Logical Drives - LSI SCSI 320-0 Configuration

7 Configuring Arrays and Logical
Drives

Step 1 Start Power Console Plus

Double-click on the Power Console Plus icon or click on the Start button, select
the Program group and choose Power Console Plus from the MegaRAID group.
The Power Console Plus screen appears:
Drive States The state of each physical drive is shown to the right of the SCSI ID or array.
The drive states are:
Drive State
Online ONLIN
Ready READY
Hot Spare HOTSP
Failed FAILED
Rebuilding REBUILD
Code
The drive is online, is part of a configured logical drive,
and is functioning normally.
The drive is functioning normally but is not part of a
configured logical drive and is not a hot spare.
The drive is powered up and is ready to use. It is
available as a spare drive in case an online drive fails.
The drive is out of service because it failed.
The drive is being rebuilt with data from a failed drive.
Chapter 7 Configuring Arrays and Logical Drives
Description
Cont'd
121