User Interface Restrictions - LSI SCSI 320-0 Configuration

User Interface Restrictions

You cannot choose a different server or adapter if an operation, such as a
rebuild, background initialization, check consistency, Performance Monitor
display, or drive reconstruction is in progress.
Power Console Plus Restrictions When selecting a new server in Full Access mode, you must
enter the password for the new server. You cannot access the new server if it is
already being managed by a system in Full Access mode or if Power Console
Plus or MegaRAID Manager is already running.
You cannot change from View Only mode to Full Access mode. You must exit
Power Console Plus and then run Power Console Plus again. Choose the server,
then choose Full Access mode and enter the password when prompted.
The screen graphics in this chapter show Power Console Plus screens with
four SCSI channels. Various MegaRAID models support one, two, three, or
four SCSI channels. The screen pictures in this manual show four SCSI
channels, since this is the most comprehensive configuration. Your
MegaRAID model may not support four SCSI channels. See the MegaRAID
Hardware Guide for your model for additional information.
MegaRAID Configuration Software Guide
100
Important