Logical Drives - LSI SCSI 320-0 Configuration

Logical Drives

A screen such as the following appears when you select Logical Drives from the
main screen or click on a logical drive in the list of logical drives on the main
screen:
The upper right section of the screen displays the logical drives that currently
exist. Below that section are options to:
•
initialize the logical drives
•
check consistency
•
display the logical drive properties
•
boot from a logical drive
After you select a logical drive to boot from, the system will boot from that
logical drive when you reboot. This field is 0-n, where n+1 logical drives are
created on the controller. For example, it would be 0-0 for a user when there is
only one logical drive on the controller. Press Go to perform the selected action
or Reset to delete any changes.
Press Go to perform the selected action or Reset to delete any changes.
Initialize You should initialize each new logical drive that you configure. You can use the
Initialize option on the Logical Drives screen to initialize logical drives. Perform
the following actions to initialize a logical drive.
Step
1 Select the Logical Drives option from the MegaRAID WebBIOS main
screen.
2 On the Logical Drives screen, select the logical drive to be initialized.
3 Click in the box next to Initialize, then click on Go. The progress of the
initialization appears as a graph on the screen.
4 When initialization completes, click on the Back button to display the
previous menu.
MegaRAID Configuration Software Guide
42
Action
Cont'd